- Back
- Who we are
- COP26
- Electricity explained
- A net zero future
-
Industry information
- Back
- Home
- Industry information
- Connections
- Balancing Services
-
Charging
- Back
- Industry information
- Charging
- Balancing Services Use of System (BSUoS) charges
- Transmission Network Use of System (TNUoS) charges
- Assistance for Areas with High Electricity Distribution Costs (AAHEDC)
- Connection charges
- Charging guidance
- Charging policy developments
- Charging statements
- Submit a charging query
-
Codes
- Back
- Industry information
- Codes
- Connection and Use of System Code (CUSC)
- Grid Code (GC)
- System Operator Transmission Owner Code
- Security and Quality of Supply Standard (SQSS)
- Balancing Settlement Code (BSC)
- Digitalised Whole System Technical Code (WSTC)
- European Network Codes (ENC)
- Codes calendar
- Code changes: Beginner's Guide
- About the Codes Team
-
Industry Data and Reports
- Back
- Industry information
- Industry Data and Reports
- System Performance Reports
- Balancing services performance monitoring report
- Data finder and explorer
- Forecast volumes and costs
- GB Electricity System Operator Daily Reports
- System balancing reports
- Monthly transmission loss data (4l)
- System constraints
- Voltage costs
- Keeping the lights on throughout coronavirus
- Accelerated Loss of Mains applications
- Our consultation responses
- Our strategy
- Research & publications
ESO
Phase 2 Auction Trial
The auction trial is an innovation project which is procuring Low Frequency Static (LFS) and Dynamic Low High (DLH) frequency products through the EPEX SPOT Auction Platform on a weekly basis.
Latest News
01/04/21- As promised in ESO Response Letter to the Auction Trial Evaluation Report, we have published the supporting document to explain the Merit Order Constraints in the HELENA algorithm. The document can be found here.
19/03/21- To increase the market transparency, we have now published the Unit ID Mapping Table, please find it here.
13/11/20- EPEX have now created a dedicated phone number for support with the Auction which will go live from 16th November 2020, the number is 0033 17037 8892. Please use this number if you require urgent support.
27/10/20-Due to higher prices in FFR TR130, we have not fulfilled our requirement for November delivery and will be moving the outstanding requirement closer to real-time, which is the Phase 2 weekly Auction DLH. This decision is in line with our ambition to move procurement closer to real-time.
18/9/20 - As promised in the Response and Reserve Roadmap issued in December 2019, we would share with you our initial findings and learnings about the Auction Trial project in a project evaluation report. The evaluation report (produced by ESP Consulting) and the ESO response letter are now available. We have now recorded a video to talk you through these two reports. Please tell us your feedback by completing this short 1-minute survey.
25/8/20 - Following the feedback we received in the Auction Trial market survey, a simplified EPEX platform user guide has now been published, please find it here.
26/6/20 - As part of the Power Responsive Summer Insights series, we have recorded a podcast on the Auction Trial. You can listen to it here.
The auction trial products below are procured to maintain system frequency closer to 50Hz.
Product Descriptions
LFS (Low Frequency Static) - This is a static service that is triggered at 49.6Hz. Minimum requirement is 1MW and must be able to deliver full output in 1 second. For full requirements please refer to the testing guidance specifications listed on the Technical Requirements tab.
DLH (Dynamic Low High) - This is a dynamic service that delivers equal volumes of Primary, Secondary and High frequency response. For full requirements please refer to the testing guidance specifications listed on the Technical Requirements tab.
EPEX SPOT are our Auctioneers for the weekly auction, to access the platform go to https://www.cts-fra.epexspot.com/login. If you are experiencing difficulties accessing the Platform please email EPEX SPOT directly using [email protected].